Software

Full design capabilities

  • AutoCAD 2012
  • SolidWorks 2013
Lathe

Engine Lathes

  • 16" Swing x 40cc, 3 & 4-Jaw Chucks w/Readout
  • 16" Swing x 60cc, 3 & 4-Jaw Chucks w/Readout

CNC Lathe

  • Haas TL-2 Turning Center
Lathe Haas Lathe

Mills

Vertical Mills
  • (3) Bridgeport 2J Head w/Readout & Powerfeed
  • Cincinnati No. 2 Horizontal w/10 x 53 Table and Overarm
  • (2) Clausing No. FV-1 w/Readout & Powerfeed
  • (2) Kent No. 3VK w/Readout & Powerfeed
  • Horizontal w/12 x 54 Table
Horizontal Mill 12 x 54 Table

VMC

  • (1) Haas Mini-Mill (x-axis = 20”, y-axis = 16”, z-axis = 14”)
  • (1) Haas VF-2 (x-axis = 30”, y-axis = 16”, z-axis = 20”)
  • Pratt & Whitney CNC (x-axis = 54" y-axis = 26" z-axis = 22")

Grinders

  • Okamoto 16" x 30" surface grinder, new in 2013
  • 8 x 12 Kent Manual
  • 8 x 16 Kent w/Full Hyd. Table
  • 36" Blanchard Rotary
  • 10 x 24 Brown & Sharpe w/Full Hyd. Table
  • Cincinnati 12 x 36 ID & OD Tool Room (Universal)
  • 12 x 24 Kent w/Full Hyd. Table
  • 12 x 36 Brown & Sharpe w/Programmable Feeds

Drills

  • Clausing Single Spindle w/Vari-Speed Head
  • Johannson Radial Arm w/#5 Taper

Saws

  • Marvel #8 vertical cut off
  • Grob Vertical w/30" Throat
  • Dake Johnson Cut Off

Hone

  • Sunnen Model MBB-1600 Tool Room Hone
Hydraulic Tryout Press 100 Ton Rousselle Straight Side Press

Presses

  • 75 T. Dake "H" Frame
  • No. 4 Floor Arbor Press
  • 100 Ton Beckwood Tryout
  • 100 Ton Rousselle Straight Side
Mitutoyo CMM

Inspection

  • Micrometer Sets to 18"
  • Vernier Calipers to 24"
  • Gage Blocks, Height Gages, Sine Plates & Misc. Gaging
  • Rockwell Tester
  • Model 574 Mitutoyo CMM 19x27x15 (X x Y x Z) Cap.

Heat Treating

  • Lucifer Dual Chamber Furnace w/Program Controller
    • 2450-Degree Hardening Capacity
    • 1200-Degree Tempering Capacity

Crane

  • 2 Ton Bridge Crane over Receiving Area

Wire EDM

    Charmilles Robofil 440
  • Agie Charmilles Cut20P, new in 2013 (x-axis=13.75", y-axis=9.875", z-axis=9.875")
  • Hitachi H-cut 203 M Max. Workpiece 18 x 14 x 6.7
  • Charmilles Robofil 440 Workpiece 20 x 40 x 16
  • Charmilles Roboform 20 CNC Sinker Workpiece 12 x 16 x 9
Charmilles Roboform 20 CNC Sinker



© Copyright 2002 - 2023 Double M Machine, Inc. All rights reserved.
Website by Route24.net